Formech IMD508, Installation, Operating And Service Manual

Page: 22 / 58

Manual - Formech IMD508
22
Operation - Setup functions for Semi-Automatic Cycle
Set the Vacuum parameters by pressing the Vacuum
button on the Semi-Auto screen.
Set the Vacuum time and delay times (if required)
by pressing on the time value and using the pop up
keypad.
Set the Cooling Fan parameters by pressing the FAN
button on the Semi-Auto screen.
Enable the Cooling function by setting the toggle
button to ‘ON’.
Set the fan time and the delay time (if required) by
pressing on the time value and using the pop up
keypad.
Set the Cycle Counter parameters by pressing the cycle
count button.
The RESET button will reset the count to zero.
Set the batch counter to set a required batch quantity.
Set the Release parameters by pressing the Release
button on the Semi-Auto screen.
Set the Release time and delay times (if required)
by pressing on the time value and using the pop up
keypad.