Formech IMD508, Installation, Operating And Service Manual

Page: 13 / 58

Manual - Formech IMD508
13
Operation - Main Menu Functions
Getting started
On the main menu screen
Turn the Heater ON
Ensure the Pump is ON
Press the Manual Button – The Manual Operation Screen will open
Control POD Functions
The following section describes the manual controls of the IMD508. Operate these controls independently
to ensure you are fully familiar with how the machine operates and how each action behaves.
Vacuum & Pressure
Gauges
Touch Screen
Emergency Stop
Emergency Stop
This momentary action latching button cuts the power to all outputs when pressed. The indi-
cator shown will be displayed on the touch screen if pressed. The button will need to be ma-
nually reset for normal operations to continue. Only use this button in emergency situations.
AIR
This indicator will show if the air supply to the machine is lost. The heaters will shut off until
air is restored. (Heating pyrometer option only)
Guard
When the Light guard is broken power is cut to all critical outputs. The Blue button on the
control POD will illuminate. Press this button to reset the Light guard. The indicator shown will
be displayed on the touch screen when the light guard is broken.
Bottom Heater Safety Detection
The bottom heater has a system to detect plastic material drooping onto the heaters. This
symbol will appear red if the sensing system is activated.
Operation Screen Safety Indicators
AIR
Guard Reset