Formech IMD508, Installation, Operating And Service Manual

Page: 21 / 58

Manual - Formech IMD508
21
Operation - Setup functions for Semi-Automatic Cycle
Set the top heater time by pressing the heater button
at the top RH Corner on the Semi-Auto screen.
Press the number in the timer button and adjust the
time using the pop-up keypad.
Adjust the bottom heater time in the same way using
the Bottom heater button.
The Pyrometer values are set on the semi-automatic
operation screens
Set the pre-stretch parameters by pressing the pre-
stretch button on the Semi-Auto screen.
Enable the pre-stretch by setting the toggle button to
‘ON’.
Set the pre-stretch time and the delay time (if
required) by pressing on the time value and using the
pop up keypad.
Set the Plug assist parameters by pressing the Plug
button on the Semi-Auto screen.
There are 2 plug stages: 1. Mould plug & 2. Release
plug
Enable the function by setting the toggle buttons to
‘ON’ or ‘OFF’ as required.
Set the Plug times and the delay times (if required)
by pressing on the time value and using the pop up
keypad.
Set the Table parameters by pressing the Table button
on the Semi-Auto screen.
Set the Table delay times (if required) by pressing on
the time value and using the pop up keypad.
Process Timer Settings