Formech IMD508, Installation, Operating And Service Manual

Page: 20 / 58

Manual - Formech IMD508
20
Operation - Setup functions for Semi-Automatic Cycle
Timed Heater Cycle
When this button shows the auto cycle is set for the timed cycle and the heaters will operate
for the times set.
Press this toggle button to set to the pyrometer heat cycle
PROGRAM Select
Press this button to load a different program. The load program screen is opened.
SAVE Program
Press this button to save the changes made to the current program. The save screen shown
all the parameters for final check.
CYCLE Counter
This feature will count the quantity of automatic cycles. Press this to set the batch counter
and reset the counter. The number shown in the oval shows the batch counter setting. The
number shown at the top shows the actual count quantity.
BACK or RETURN
This button will return to the main menu.
PAUSE
This button is a manual over-ride to pause the heating stage timer. It is essential to monitor
this manual intervention to prevent material overheating.
JUMP / Advance
This button is a manual over-ride to end the heating stage timer before time-out or to end
the heating stage after Pause’ is applied.
Pyrometer timed cycle
When this button shows the auto cycle is set for the pyrometer control and the heaters will
operate for the target temperature set. The temperature of the pyrometer is shown above the
button and the target temperature is shown below the button.
Press this toggle button to set to the timed heat cycle.
PAUSE
JUMP /
ADVANCE