This program allows users to make a sequence of cuts with the same dimension (card size) or 2 alternating dimensions
(card size and gutter/gap).
Start dimension
CaRD CUTTInG
Card size dimension
Gutter/Gap dimension
sTaRT DIMensIon
- the first cut dimension in the card cutting sequence
CaRD sIZe DIMensIon
- dimension of card (stripe)
GUTTeR/GaP DIMensIon
- dimension of the gutter between cards (if used). If there is no gutter, enter the card dimen-
sion again.
6
This function allows the user to edit the program by making the back gauge move and cut.
Pressing the
Cut & save
button activates the screen allowing the user to move into Absolute, Incremental or Manual
Mode.
Cut and save
The dimension where the cut was made is saved automatically as a step dimension in the current program. After each cut,
program automatically moves to the next step.
To exit
PRoGRaM MoDe
, press
ReTURn
to return to the Main Menu.
Summary of Contents for Cut-True 29A
Page 1: ...Cut True 29A 29H Guillotine Cutters PROGRAMMING MANUAL First Edition 11 2016...
Page 2: ......
Page 4: ......