Touch to reset the counter
oPTIons MenU
The back gauge moves into the starting position for the first dimension and after each cut, it moves automatically to the
next step.
It is possible to skip programmed cuts. Press to move the back gauge to the next step without cutting.
Press to return the back gauge to the previous step.
Pressing
PRoGRaM sToP
stops the card cutting program.
Pressing
Yes
moves the back gauge automatically into the first dimension to repeat the same program.
Pressing
no
exits the program.
options - Resetting the counter
7
Pressing the arrow toggles between these two screens
After each cycle, when the last strip is too narrow to cut, the following screen appears:
When the safety curtain is inactive,
the screen will show the current
location of the back gauge
Touch the hand symbol then enter the value. Confirm each value by pressing
enTeR,
or press
DeleTe
to
re-enter. Pressing
esCaPe
returns to this menu without making any changes.
After the dimensions are entered, press
PRoGRaM sTaRT:
the program starts automatically.
Summary of Contents for Cut-True 29A
Page 1: ...Cut True 29A 29H Guillotine Cutters PROGRAMMING MANUAL First Edition 11 2016...
Page 2: ......
Page 4: ......