Manufactured by Taylor Design Group, Inc. P.O. BOX 810262 Dallas, TX 75381
©2016 by Taylor Design Group, Inc. All rights reserved.
Before using the INCRA Miter5000, read and follow all of the instructions and safety information in this owner’s manual.
°
When using the INCRA Miter5000 in conjunction with any other tool, first read and follow all instructions and safety information
in that tool’s owner’s manual.
°
Never let the saw blade come in contact with the aluminum or steel components of the INCRA Miter5000.
°
Before making any cut, always make sure that the Miter5000’s Sled Base Right is locked securely in the right hand miter slot.
°
When using the INCRA Miter5000, always keep your hands clear of the saw blade and the line of cut.
°
Always turn o
ff
the power and make sure that the saw blade comes to a complete stop before changing the setting of any part of the
INCRA Miter5000.
°
Always securely tighten the large black clamping knob before starting any cut.
°
Wear safety glasses, hearing protection, and follow all normal shop safety practices.
°
After making any adjustments to the miter angle or fence position of your INCRA Miter5000, always verify safe clearance between
the blade and fence before turning on the saw.
°
After making any adjustments to the fence position on the INCRA Miter5000, always make sure that the four socket head screws on
the fence mounting bracket and the outboard fence lock are securely tightened.
°
When using the INCRA Flip Shop Stop to position a piece for a cut, always hold or otherwise clamp the board between the stop and
the blade.
O
WNER
’
S
M
ANUAL
w w w . i n c r a . c o m
Important safety instructions for using the
INCRA Miter5000
Before using the
INCRA
Miter5000
, read and follow
all of the instructions and
safety information in this
owner’s manual.
by
SAFETY
