![background image](http://html1.mh-extra.com/html/formax/6602-series/6602-series_operators-manual_2320016062.webp)
61
ENGLISH
•
Volume of modem: set the modem volume.
a
Press
or
to change the volume of the speaker.
Do not set the volume to zero as the sound of the modem is helpful during
remote assistance.
b
Press
to confirm modified settings.
4.4
Production
Feeder
4.4.1
Function
The Production Feeder is a feeder that can be loaded with a high number of documents.
This feeder is intended to be used for Business Reply Envelopes (BRE), but also ‘standard’
documents up to 356 mm (14") length can be processed with it. It is possible to install
two Production Feeders to the system.
4.4.2
Preparations
The Production Feeder should be installed at the
position of feeder no. 1 and / or 4.
It can be placed into position in the same way as the
other document feeders are fitted.
Proceed as follows:
1. Lift the paper feed rollers with the front edge of
the Production Feeder.
2. Move the Production Feeder forward until it hooks
behind the frame axle.
3. Connect the connector A to the socket B.
The Production Feeder is auto-detected by the system when it is switched on. This makes it
easy to switch over from the standard document feed tray to the Production Feeder and vice
versa.
Note
To allow easier hooking on of the
Production
Feeder it is advised to put the feeding plate in
the r
ear position (see 4.4.4 ”Document Separation” on page 62).
To make use of a Production Feeder it is not necessary to (re-)program the jobs.