![background image](http://html1.mh-extra.com/html/formax/6602-series/6602-series_operators-manual_2320016042.webp)
41
ENGLISH
Note
The maximum number of sheets in a set is 25. When the number of sheets exceeds 8 or
10, depending on the fold, the document can not be folded anymore. In this case, the
maximum length of sheets is 156 mm (6.1 inch) for a C5 envelope. Also make sure that
the fold is set to No fold.
Ignoring this will certainly lead to stoppages.
When the maximum number of sheets exceeds the programmed maximum number of
sheets in a set, the machine stops and error VS:110 will be displayed. After removing the
set and pressing the
button, the machine will start and repeat the process until an
insert or divert mark is encountered, error VS:135 (final set part) will be displayed.
By pressing the
button the next “OMR settings”
menu appears. This menu covers the following
setting:
•
Stop on misread: press
to set if the
machine should stop or not on misreading an
optical mark.
When “stop on misread” is set to “yes”, the machine
stops after detecting an OMR misreading. The
incorrect set is diverted. After resetting the machine,
the final part of the set is also diverted and the system starts processing again. The
diverted set(s) should be checked by the operator.
When “stop on misread” is set to “no” the machine does not stop after detecting an OMR
misreading. The incorrect set is diverted. The final part of the set is also diverted and then
the machine starts processing again. After detecting 5 OMR misreadings in a row, the
system stops and an error code is generated.
By pressing the
button the next “OMR settings”
menu appears. Select the
button to select if an
envelope leaves from the stacker if an OMR-mark is
read or if no OMR-mark is read (space). For the side
exit the opposite applies.