![background image](http://html1.mh-extra.com/html/formax/6602-series/6602-series_operators-manual_2320016038.webp)
37
ENGLISH
-
Press
to display a numeric keypad to enter the exact dimension of the
document.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on installation settings). The machine will not allow entering
dimensions outer technical ranges. The document size can be set between 90 mm
(3.54 inch) and 356 mm (14 inch).
The default document size setting of a new job is 297 mm (11.7 inch). This is
position B in the collator area.
When the document size is decreased in
such a way that an earlier collator stop
position can be used, a screen will be shown
when the
button is pressed. When
YES is selected, each time the job is
selected the paper stoppers have to be set
according to the job. When NO is selected
the original stop position will be used.
•
Press
to link two feeders. This function
enables to fill two adjacent feeders with the same documents. When the first feeder is
empty, the system automatically swaps to the other feeder.
-
Press
to select two adjacent feeders. The selected feeders will be
highlighted.
-
Press
to link two highlighted feeders.
The will be displayed between the selected feeders.
Note
When linking two feeders, the program will automatically apply the number and format of
the documents of the lowest feeder to the other feeder.
Note
When a feeder is selected for OMR the feeder below can not be linked to this reading
feeder. The reading feeder can be linked to a feeder above when it is not selected for
selective feeding.
•
Press
to enter the setting of the Daily Mail function.
This function enables to process documents or sets of documents, which can not be
processed automatically (see 3.8 ”Run the Daily Mail” on page 32). The feeder that is
fit for the Daily Mail function will automatically be selected.