BCR basic license
For the BCR basic license the following functions are available:
• Page N of M: as long as N is below M, the document set is not complete. As soon
as N=M, the set is complete and will be inserted into an envelope.
• Insert/Accumulate: defines when a document set is complete and must be inserted
into an envelope.
• Customer ID: BCR uses the Customer ID code to complete a set.This is only possible
with reverse reading. If the ID changes, the set is inserted.
At least codes for accumulate and insert are required.
BCR advanced license
For the BCR advanced license the following functions are available:
• The basic functions (page N of M, insert/accumulate, Customer ID)
• Sheet sequence - every sheet has a number, regardless of the document set it is
part of. If a sheet is missing, an error is generated.
• Group sequence - every document in a set has the same group number. If one
document set is missing, an error is generated.
• Selective feed - if the system reads the command, an enclosure from the enclosure
feeder is added to the set. This function is printed on the last sheet of a set.
• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating error
(VS:113 - Reading stop - Stop mark read).
Reading a configuration sheet (BCR only)
If you want to set the code definition for BCR, you can use a BCR configuration sheet.
To read a configuration sheet:
1.
In the Supervisor menu, press the
[Read config sheet]
button.The Barcode
configuration sheet menu appears.
2.
Load the barcode configuration sheet in the top feeder.
74
| Page 74 | jan-06-2012 13:58 |
7
En
glish
