4.
Press the
button if you want to adjust the envelope position before running
the test run (see
Adjusting the Envelope Position
on page 41).
5.
Press the
[1x]
button to perform the test run.
Adjusting the Envelope Position
Before performing a test run, it is possible to adjust the envelope position.
To adjust the envelope position:
1.
Press the
button to start adjusting the envelope position.
2.
Use the arrows beneath the ruler to adjust the envelope position.
3.
Press the
to check the new alignment.
4.
Press the
[OK]
button to accept the new alignment.
5
En
glish
41
| Page 41 | jan-06-2012 13:58 |
