Running diagnostics
To run a diagnostics of the system:
1.
In the Test menu, press the
[Diagnostics]
button. The Hardware test screen appears.
2.
Remove all documents and envelopes and close all covers before starting the diagnose.
3.
In the Hardware test menu, press the
[Start diagnose]
button.
When the test is finished, the Status report is shown, showing a list of all problems
found during diagnostics.
4.
If no problems were found, press the
[OK]
button.
If problems have been found that can not be solved, call your service organization.
64
| Page 64 | jan-06-2012 13:58 |
6
En
glish
