Adjusting the
Production
Feeder Document Separation
When the
production f
eeder is used at an automatic separation feeder, the separation is set
automatically.
It can
also be used on a
feeder
position with a manually adjusted separation.
To adjust, proceed as follows:
1.
Remove the document feeder trays 2 and 3.
The lowest feeder is feeder 1.
2.
Squeeze the two blue handles
A
and
B
and shift the feeding plate
C
as far as possible
to the front.
3.
Push knob
D
forward until it clicks.
4.
Place a document/BRE on the feeder tray and slide it in the system till the leading
edge is not visible anymore. Turn knob
D
counterclockwise if the separation is set to
narrow.
5.
Push the document/BRE between the rollers.
6.
Turn knob
D
clockwise to get more resistance and counterclockwise if the separation
is set to narrow.
The separation is adjusted correctly when a slight resistance is felt on the
document/BRE.
7.
Pull knob
D
back when ready.
8.
Replace the document feeder trays 2 and 3.
3
En
glish
23
| Page 23 | jan-06-2012 13:58 |
