Forlinx FET6254-C, Hardware Manual

Page: 57 / 73

Hardware manual
OK6254-C FET6254-C
www.forlinx.net
- 57 -
1. Please distribute RGB signals correctly;
2. Please don’t mount LCD and LVDS touch chips to the same IIC;
3. Impedance requirement: single end 50oh; differential 100ohm.
3.5.8 Video Input
The SoM supports one MIPI DPHY 4Lanes input, it’s available on carrier board by P15 2x10P 2.0mm pin
headers for 4 Lanes backup. And by P13 26P with pitch of 0.5mm for 2 Lanes FPC for Forlinx OV5645
module.
Note:
1. IIC power should be matched properly;
2. Power supply of camera should be with magnetic bead for filter;
3. Impedance requirement: differential 100ohm
3.5.9 TF Card
P7 on carrier board is for TF card which could be used for system booting and firmware installing