5
UNIT DIAGRAM
*I
LLUSTRATIONS MAY DIFFER FROM THE PRODUCTS
.
UNPACKING THE AIR CONDITIONER
•
Remove and save the shipping carton and packing materials for future storage or transport
of the unit. Otherwise, dispose of packaging materials, waste recycling where possible.
Remove tape and glue residue from surface before turning on the air conditioner. Rub a
small amount of liquid dish soap over the glue residue with your fingers. Wipe with warm
water and dry.
• Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to
remove tape or glue. These products can damage the surface of your air conditioner.
• Handle with care. We recommend that 2 persons move and install this air conditioner.
ELECTRICAL REQUIREMENTS
•
The electrical ratings are listed on the rating plate of this air conditioner.
• Make sure to follow the requirements for the type of plug ending the power supply cord :
- 125 V (103,5 min. - 126,5 max.)
- 0-15 A
- 15A time-delay fuse or circuit breaker
-
Do not connect to an outlet use by other appliances ;
preferably, use on a single outlet circuit
• The air conditioner must be grounded ; it is equipped with a power supply cord ending
with a grounded plug (3 prongs) and must be plugged into a properly rated 3-prong
grounded outlet.
• If you do not have a grounded outlet available, contact a qualified electrician to have a
grounded outlet properly installed.
• Do not alter the power supply plug by removing the ground plug.
RECOMMENDATIONS
•
This air conditioner is designed for an easy installation in a vertical window (casement or
sliding type). It is not designed for single or double-hung window.
•
Make sure you install the air conditioner in a window that will hold the weight (refer to the
rating plate on your unit) ; reinforce if necessary.
• Secure the unit as per the instructions.
INSTALLATION
Horizontal air vent
Interior air outlet
Air filter
(under the louvers)
Interior air inlet grille
Front panel
Air exchanger
Control panel
Enclosure
Vertical air vent
Exterior air inlet
