11
UNIT OPERATION
ENERGY SAVING MODE
Based on set temperature, the fan cycles on and off along with the compressor. This mode
will result in large variations of room temperature and humidity. It is recommended to use
this mode when the room is unoccupied.
1.
Press on
MODE
and set until the
ENERGY SAVING
icon lights on.
2.
Press or to set room temperature. The set temperature will show on the LED
display. If both keys are pressed at the same time, the temperature LED display will
alternate between
o
C and
o
F.
3.
Press on
FAN SPEED
to set fan speed at :
AUTO
,
LOW
,
MEDIUM
or
HIGH.
The matching
LED icon will light on when selected.
NOTE :
The fan and the compressor may not cycle on and off simultaneously.
SETTING THE TIMER
The timer is used to set an automatic start or shut off of the air conditioner.
Automatic start :
1.
Press on
TIMER
when the unit is
OFF
; the
TIMER
icon will light on.
2.
Press or to set the numbers of hours (1-24) before the automatic start.
3.
The LED display shows the time left (in hours) before the unit turns on.
4.
To cancel the timer, press on
TIMER
again.
Automatic shut off :
1.
Press on
TIMER
when the unit is
ON
; the
TIMER
icon will light on.
2.
Press or to set the numbers of hours (1-24) before the shut off.
3.
The LED display shows the time left before the unit turns off for only 12 seconds, then LED
shifts to display set temperature.
4.
To cancel the timer, press on
TIMER
within the 12 seconds.
AIR EXCHANGER
• For maximum continuous cooling, set the
AIR EXCHANGER
control to
CLOSED
- it only
circulates the air in the room.
• To draw stale or smoky air out of the room, set the air exchanger control to
OPEN
- it
exhausts outdoor the air in the room.
Note :
the Air Exchanger will function only when the fan is operating.
