USING THE REMOTE CONTROL
• Always line up the remote signal transmitter with the unit signal receiver on the front panel.
T
O TURN THE AIR CONDITIONER ON OR OFF
:
press on
POWER
.
T
O SELECT THE MODE
:
Press
MODE
to set the unit in COOLING mode, or press
POWER
SAVER
to set the air conditiioner in ENERGY SAVING mode.
T
O SELECT THE FAN SPEED
:
Press
HGH, MID, LOW
or press
AUTO
.
*Note :
AUTO fan speed cannot be used in FAN ONLY mode.
T
O SET THE TEMPERATURE
:
Press the
+ -
keys
to set the temperature. Each time you press or
hold these buttons, the temperature goes up or down by 1
o
.
T
O SET THE TIMER
:
• Automatic start time :
Press
TIMER
when the unit is OFF. Then, press the
+ -
keys
to set the
numbers of hours (1-24) before the turn on. Presss
TIMER
again to cancel the timer.
• Automatic shut off :
Press on
TIMER
when the unit is ON. Then, press the
+ -
keys
to set
the numbers of hours (1-24) before the shut off. Press
TIMER
again to cancel the timer.
12
REMOTE CONTROL
2 x AA (1.5V) batteries (included) power the remote control.
•
Do not use rechargeable batteries.
How to insert the batteries
• Following the arrows shown in the figure, remove the
battery cover.
• Insert the 2 batteries, making sure that the terminals
(+ /-) are correctly fitted.
• Put the cover back into position.
POWER :
turns the unit on or off
MODE : t
o set operation mode
AUTO :
fan speed automatic mode
MID :
medium fan speed
TIMER :
to set timer on or off
POWER SAVER :
sets the unit in
ENERGY SAVING mode
LOW :
lowest fan speed
HIGH :
highest fan speed
+ - KEYS
: to set room temperature in
cooling mode or to set time when
Timer is on
NOTE : Remote control may differ from illustration.
