The daytime running lamps turn on when:
1.
The ignition is switched to the on
position.
2. The lighting control is in the off
position, parking lamps position or the
autolamps position, and the sensor
detects daylight.
3. Your vehicle is in drive (D).
AUTOMATIC HIGH BEAM
CONTROL
(If Equipped)
The system will automatically turn on your
high beams if it is dark enough and no other
traffic is present. When it detects the
headlights of an approaching vehicle, the
tail lamps of the preceding vehicle or street
lighting, the system will turn off the high
beams. The low beams remain on.
Note:
If it appears that automatic control
of the high beams is not functioning
properly, check the windshield in front of
the camera for a blockage. A clear view of
the road is required for proper system
operation. Have any windshield damage in
the area of the camera’s field-of-view
repaired.
Note:
If the system detects a blockage such
as bird droppings, bug splatter, snow or ice,
and you do not observe changes, the system
will go into low beam mode until you clear
the blockage. A message may also appear
in the instrument cluster display noting the
front camera is blocked.
Note:
In cold or inclement weather
conditions, you will notice a decrease in the
availability of the high beam system,
especially at start up. If you want to change
the beam state independently of the
automatic control, you may switch the high
beams on or off using the lever. Automatic
control will resume when conditions are
correct.
Note:
Modification of the vehicle ride height
such as using much larger tires, may
degrade feature performance.
A camera sensor, centrally mounted
behind the windshield of your vehicle,
continuously monitors conditions to decide
when to turn the high beams off and on.
Once the system is active, the high beams
will turn on if:
•
The ambient light level is low enough.
•
There is no traffic in front of the vehicle.
•
The vehicle speed is greater than
32 mph (52 km/h).
The high beams will turn off if:
•
The system detects the headlamps of
an approaching vehicle or the tail
lamps of a preceding vehicle.
•
Vehicle speed falls below 27 mph
(44 km/h).
•
The ambient light level is high enough
that high beams are not required.
•
The system detects severe rain, snow
or fog.
•
The camera is blocked.
Activating the System
Switch on the system using the information
display and autolamps. See
Switch the lighting control to the
autolamps position. See
75
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Lighting
