Locking the doors
Press LOCK to lock all
doors and liftgate
(wagon).
To confirm all doors
are closed and locked,
press LOCK a second
time. The doors will
lock again, the horn
will chirp and the lamps will flash.
This process will arm your anti-theft system. For
more information on arming the anti-theft system,
refer to
Anti-theft system
in this chapter.
Sounding the PANIC alarm
Press PANIC to
activate the alarm.
To deactivate the
alarm, press PANIC
again or turn the
ignition to ACC or ON.
This device complies
with part 15 of the
FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
Arming and disarming the alarm system
Your remote entry system will:
•
automatically arm the factory installed anti-theft
system when the doors are locked.
•
reset the triggered anti-theft alarm (when the
driver’s door is unlocked or when PANIC is
pressed on a programmed remote entry
transmitter).
LOCK
UN
LOCK
PANIC
TRUNK
LOCK
UN
LOCK
PANIC
TRUNK
Seating and safety restraints
45
