Ford Taurus 1997 Owner'S Manual Download

Page: 95 / 168

3.0L 2-Valve Vulcan Engine

Station
Wagon

4/270 (600) 0

365 (800)

2/135 (300) 70 (150)

430 (950)

2/135 (300) 0

500 (1100)

The above chart is based on the specified vehicle at
a maximum GCW (Vehicle Trailer weight)
equal to 2245 kg (4950 lbs.).

3.0L 4-Valve Duratec Engine and SHO Sedan

Model

Passenger
Load

#/kg

(lbs.)

Luggage
Load

(lbs.)

Max Trailer
Wt.

(lbs.)

Sedan

5/340 (750) 0

590 (1300)

2/135 (300) 70 (150)

725 (1600)

2/135 (300) 0

795 (1750)

Station
Wagon

5/340 (750) 70 (150)

455 (1000)

2/135 (300) 70 (150)

660 (1450)

2/135 (300) 0

725 (1600)

The above chart is based on the specified vehicle at
a maximum GCW (Vehicle Trailer weight)
equal to 2270 kg (5450 lbs.).

Do not exceed the GVWR or the GAWR
specified on the Safety Compliance

Certification Label.

Towing trailers beyond the maximum
recommended gross trailer weight exceeds

the limit of the vehicle and could result in engine
damage, transaxle damage, structural damage, loss
of control, and personal injury.

Driving

Summary of Contents for Taurus 1997









































































































































































Search results

Summary of Contents for Taurus 1997

Reviews:

Related manuals for Taurus 1997

Brands by name

Popular brands

Ford Taurus 1997, Owner'S Manual

Search results

Summary of Contents for Taurus 1997

Reviews:

Related manuals for Taurus 1997

Brands by name

Popular brands