Fig. 8: Locating Passenger-side Air Bag Deactivate Switch Screws
Courtesy of FORD MOTOR CO.
Installation
1. To install, reverse removal procedure. Connect negative battery cable. With air bag simulators installed at
all deployable devices, perform system operation check. See
SYSTEM OPERATION CHECK
.
Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored
energy.
2. Activate air bag system. See
ACTIVATING SYSTEM
under DISABLING & ACTIVATING AIR BAG
SYSTEM. Check AIR BAG warning light to ensure system is functioning properly.
PASSENGER-SIDE AIR BAG MODULE
Removal
1. Before proceeding, See
AIR BAG SAFETY PRECAUTIONS
. Disable air bag system. See
DISABLING SYSTEM
under DISABLING & ACTIVATING AIR BAG SYSTEM.
2. Working through glove box opening, remove passenger-side air bag module retaining bolts. See
Fig. 9
.
Using appropriate flat-bladed tool, carefully insert tool under right bottom edge of air bag module door.
Lift lower right corner of passenger-side air bag door with tool and separate from retaining clip. Separate
rest of door from retaining clips by lifting door by hand. Remove air bag module through front of
2001 Ford Pickup F350 Super Duty
2001 ACCESSORIES/SAFETY EQUIPMENT Ford Motor Co. - Air Bag Restraint Systems
Helpmelearn
November-29-07 7:13:42 PM
Page 22
© 2005 Mitchell Repair Information Company, LLC.