5. If the window does not open or close
automatically when the switch is
pressed or lifted to second action
points, repeat the procedure.
Safety Mode
WARNING
The anti-trap function is not active
during this procedure.
If the system detects a malfunction, it
enters a safety mode. The windows will
move for only about 0.5 seconds at a time
and then stop again. Close the windows
by pressing the switch again when the
windows stop moving.
Contact an authorized dealer.
Bounce-Back
The window will automatically stop and
reverse some distance if it detects an
obstacle while closing.
Overriding the Bounce-Back Feature
WARNING
When you override the bounce-back
feature the window will not reverse
if it detects an obstacle. Take care
when closing the windows to avoid
personal injury.
Proceed as follows to override this
protection feature when there is a
resistance, for example in winter:
1.
Close the window twice until it reaches
the point of resistance and let it
reverse.
2. Close the window a third time to the
point of resistance.
3. The bounce-back feature is now
disabled and you can close the window
manually
4. The window will go past the point of
resistance and you can close it fully.
See an authorized dealer as soon as
possible if the window does not close after
the third attempt.
Resetting the Bounce-Back Feature
WARNING
The bounce-back feature remains
turned off until you reset the
memory.
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
1.
Lift and hold the switch until the
window is fully closed.
2. Release the switch.
3. Lift the switch again for one second.
4. Press and hold the switch until the
window is fully open.
5. Release the switch.
6. Lift and hold the switch until the
window is fully closed.
7.
Open the window and then try to close
it automatically.
8. Reset and repeat the procedure if the
window does not close automatically.
GLOBAL OPENING AND
CLOSING
You can use the remote control to operate
the windows with the ignition off.
Note:
You can enable or disable this feature
in the information display or see an
authorized dealer. See
Note:
To operate this feature, accessory
delay must not be active.
56
Ranger (), EB3B-19G219-ZAB enAUS
Windows and Mirrors
