Ford Probe Owner'S Manual Download Page 77

Page: 77 / 298

Steering Column Controls

[SC00300(ALL)01/95]

The controls on the steering column and wheel
are designed to give you easy access to the
controls while you are driving.

[SC00400(ALL)01/95]

The Turn Signal Lever

[SC00500(ALL)01/95]

You can use the turn signal lever on the left side
of the steering column to:

[SC00600(ALL)08/91]

❑

operate the headlamps and parking lamps

[SC00700(ALL)03/95]

❑

operate the turn signals and cornering lamps

[SC00800(ALL)01/95]

❑

turn the high beams on/off

[SC00900(ALL)05/95]

❑

flash the lamps

[SC00950(ALL)08/91]

Headlamps and Parking Lamps

[SC00975(ALL)01/92]

To turn the parking lamps or headlamps on,
twist the knob at the end of the turn signal
lever.

[SC01000(ALL)05/95]

FIRST STOP — Turning the knob to the first
stop (

) will turn on the the license plate

lamps, parking lamps, side marker lamps, tail
lamps and instrument panel lamps.

[SC01050(ALL)05/95]

SECOND STOP — Turning the knob to the
second stop (

) will turn on the headlamps,

license plate lamps, parking lamps, side marker
lamps, tail lamps and instrument panel lamps.

File:prscp.ex

Update:Fri Jun 23 19:37:07 1995

Summary of Contents for Probe











































































































































































































































































































Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands

Ford Probe, Owner'S Manual

Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands