Ford Probe Owner'S Manual Download Page 111

Page: 111 / 298

111

[FV15000(ALL)01/92]

To lower the rear seatback:

[FV15050(ALL)05/95]

half page art:0030099-D

[FV15300(ALL)05/95]

To raise the seatback, lift the seatback rearward
until it latches. Make sure the seatback is locked
in position by pushing it forward and backward.

[FV17900(ALL)05/95]

WARNING

Securely latch the seatback in the upright
position to prevent the seatback or objects
from being thrown forward during a
sudden stop or collision.

[FV18000(ALL)05/95]

WARNING

Do not pile cargo higher than the
seatbacks to avoid injuring people in a
collision or sudden stop.

File:prfvp.ex

Update:Fri Jun 23 19:36:28 1995

Summary of Contents for Probe











































































































































































































































































































Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands

Ford Probe, Owner'S Manual

Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands