Ford Probe Owner'S Manual Download Page 39

Page: 39 / 298

Starting Your Probe

[ST01700(ALL)03/95]

Ignition

[ST01800(ALL)01/95]

Understanding the Positions of the Ignition

[ST02050(ALL)01/92]

one third page art:0032054-A

Ignition lock cylinder

[ST02100(ALL)09/93]

LOCK locks the steering wheel. It also locks the
gearshift lever in P (Park) (automatic transaxle).

[ST02200(ALL)01/95]

LOCK is the only position that allows you to
remove the key. The LOCK feature helps to
protect your vehicle from theft.

[ST02250(ALL)08/91]

To remove the key if you have a manual
transaxle, push the key in while turning it to the
LOCK position.

[ST02300(ALL)05/95]

If your key is stuck in the LOCK position and
will not turn, move your steering wheel left or
right until the key turns freely.

[ST02350(ALL)01/94]

ACC (Accessory) allows some of your vehicle’s
electrical accessories to operate while the engine
is not running.

File:prstp.ex

Update:Fri Jun 23 19:38:23 1995

Summary of Contents for Probe











































































































































































































































































































Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands

Ford Probe, Owner'S Manual

Search results

Summary of Contents for Probe

Reviews:

Brands by name

Popular brands