manualshive.com logo in svg

Ford Probe, Owner'S Manual

Share
Download
Ford Probe Owner'S Manual Download Page 136

136

*

[AS21400(ALL)02/95]

Using the Controls on Your New Radio

*

[AS21500(ALL)02/95]

How to turn the radio on and adjust the
volume

*

[AS21701(ALL)04/95]

Press the “POWER” button to turn the radio on.
Press it again to turn it off.

*

[AS21950(ALL)05/95]

Press the right (+) side of the “VOLUME”
button to increase the volume. Press the left (-)
side of the button to decrease the volume.
Illuminated bars in the display show the relative
volume level.

*

[AS21975(ALL)04/95]

NOTE: If the volume level is set above a

certain listening level when the
ignition switch is turned off, when the
ignition switch is turned back on, the
volume will come back to a “nominal”
listening level. However, if the radio
power is turned off (with the
“POWER” button), the volume will
remain in the position it was set at
when radio power is switched back on.

*

[AS22100(ALL)04/95]

Selecting the AM or FM frequency band

*

[AS22225(ALL)02/95]

Push the “AM/FM” button to select the desired
frequency band. Pushing the button more than
once will alternate between AM, FM1 and FM2.
These functions are used with the station
memory buttons described under How to tune
radio stations.

*

[AS22300(ALL)05/95]

How to tune radio stations (Stereo Radio)

*

[AS22400(ALL)05/95]

There are three ways for you to tune in to a
particular station. You can manually locate the
station by using the “TUNE” button, “SEEK” the
station or select the station by using the memory
preset buttons, which you can set to any desired
frequency.

File:prasp.ex

Update:Fri Jun 23 19:35:26 1995

Summary of Contents for Probe











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands