manualshive.com logo in svg

Ford Probe, Owner'S Manual

Share
Download
Ford Probe Owner'S Manual Download Page 62

61

[LG06360(ALL)05/95]

3.

Check the oil level when the vehicle is on
level ground.

[LG06370(ALL)11/91]

4.

Add only as much oil as the engine needs
before you drive the vehicle again. Do not
overfill the oil reservoir. For more
information, see Adding engine oil in the
Index.

*

[LG06400(ALL)01/95]

Engine Coolant Temperature Gauge

*

[LG06500(ALL)03/95]

This gauge indicates the temperature of the
engine coolant, not the coolant level. If the
coolant is not at its proper level or mixture, the
gauge indication will not be accurate.

*

[LG06600(ALL)03/94]

The pointer usually moves from C (cold) into
the NORMAL band as your vehicle warms up.
Under most driving conditions, the pointer
should stay in the NORMAL band. If you are
driving in heavy traffic or on an extended grade
in hot weather, the pointer may reach to the top
of the NORMAL band.

*

[LG06700(ALL)05/95]

If, under any circumstances, the pointer moves
above the NORMAL band, the engine coolant is
overheating and continued operation may cause
engine damage.

*

[LG06800(ALL)01/95]

If your engine coolant overheats:

*

[LG06900(ALL)03/95]

1.

Pull off the road as soon as it is safely
possible.

*

[LG07000(ALL)04/95]

2.

Shut off the engine immediately or severe
engine damage could result.

*

[LG07100(ALL)05/95]

3.

Let the engine cool.

*

[LG07200(ALL)03/95]

4.

Check the coolant level following the
instructions on checking and adding coolant
to your engine. (See Engine coolant in the
Index.) If you do not follow these
instructions, you or others could be injured.

File:prlgp.ex

Update:Fri Jun 23 19:38:06 1995

Summary of Contents for Probe











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands