Ford Mystique Page 73 Owner'S Manual Download | Manualshive

Page: 73 / 278

background image

Controls and Features

73

[CF23600(ALL)12/95]

10-1/2 pica

art:0001191-B

The master controls on the driver’s door

*

[CF23700(ALL)01/96]

R

WARNING

Do not let children play with the power windows.

[CF23800(ALL)12/95]

One-touch-down window

[CF23900(ALL)12/95]

The one-touch-down feature allows you to completely open the
driver’s window by briefly pressing and releasing the bottom of
the window switch. To stop the window before it opens
completely, press the switch again.

[CF24000(ALL)12/95]

The one-touch feature only opens the window. To close the
window, you must press and hold the top of the switch.

[CF24100(ALL)12/95]

Rear window lockout

[CF24200(ALL)12/95]

To lock out the rear window switches with the master controls,
slide the lockout switch to the left. To restore individual control,
slide the switch to the right.

File:05cdcfz.ex

Update:Fri May 31 14:31:06 1996

«
...
71
72
73
74
75
...
»

Summary of Contents for Mystique























































































































































































































































































Reviews:

No comments

Related manuals for Mystique

Brand: Acdeos Pages: 38

Brand: Back View Pages: 168

Brand: Eclipse Pages: 6

Brand: Jabra Pages: 2

Brand: Jabra Pages: 38

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Brand: Kia Pages: 419

2008 MX-5 Miata

Brand: Mazda Pages: 400

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Quattroporte Automatic

Brand: Maserati Pages: 272

Brand: MASCOT Pages: 12

Brand: PEUGEOT Pages: 17

Brand: RAM Pages: 330

Brand: Prime Design Pages: 8

Brand: Ford Pages: 51

Brand: iSimple Pages: 12

Brand: Uniden Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands