Ford Mystique Page 135 Owner'S Manual Download

Page: 135 / 278

Driving

135

[GF09600(ALL)12/95]

10-1/2 pica

art:0001265-A

The positions of the floor-mounted gearshift

[GF09700(ALL)12/95]

Always push the clutch pedal all the way to the floor when you
shift. You should upshift according to the speeds given in the
shift speed chart.

[GF09800(ALL)01/96]

Backing up

[GF09900(ALL)01/96]

To shift into R (Reverse):

[GF10000(ALL)12/95]

Completely stop your vehicle.

[GF10100(ALL)12/95]

Depress the clutch pedal to the floor and place the gearshift
lever in the Neutral position. Do not release the clutch pedal.

[GF10200(ALL)12/95]

NOTE: If the following step is not followed, a grinding noise

may occur.

[GF10300(ALL)12/95]

Wait a minimum of three seconds before attempting to shift
into R (Reverse) gear.

[GF10400(ALL)12/95]

Push the gearshift lever completely to the right, pull up the
ring on the stalk of the gearshift lever, and then pull
rearward on the gearshift lever to engage the R (Reverse)
gear.

[GF10500(ALL)12/95]

If the R (Reverse) gear is engaged, slowly release the clutch
pedal from the floor.

File:09cdgfz.ex

Update:Fri May 24 08:25:56 1996

Summary of Contents for Mystique























































































































































































































































































Search results

Summary of Contents for Mystique

Reviews:

Related manuals for Mystique

Brands by name

Popular brands

Ford Mystique, Owner'S Manual

Search results

Summary of Contents for Mystique

Reviews:

Related manuals for Mystique

Brands by name

Popular brands