Ford Mystique Page 128 Owner'S Manual Download | Manualshive

Page: 128 / 278

background image

128

%

*

[GF03900(ALL)01/96]

Steering Your Vehicle

%

*

[GF04000(ALL)01/96]

Your vehicle comes with power steering. Power steering uses
energy from the engine to help steer your vehicle.

%

*

[GF04100(ALL)03/96]

If the amount of effort needed to steer your vehicle changes at a
constant vehicle speed, have the power steering system checked.
If the power steering system breaks down (or if the engine is
turned off), you can steer the vehicle manually but it takes more
effort.

*

[GF04200(ALL)01/96]

Never hold the steering wheel to the extreme right or left for
more than five seconds if the engine is running. This can
damage the power steering pump.

%

*

[GF04300(ALL)01/96]

Driving with an Automatic Overdrive
Transaxle

[GF04400(ALL)12/95]

Your automatic overdrive transaxle provides fully automatic
operation in either D (Overdrive) or with the transaxle control
switch depressed. Driving with the shift selector in D
(Overdrive) gives the best fuel economy for normal driving
conditions. For manual control, start in 1 (First) and then shift
manually.

%

*

[GF04500(ALL)02/96]

Putting Your Vehicle in Gear

[GF04600(ALL)12/95]

You must push in the thumb button to move the gearshift to
the position you choose.

*

[GF04700(ALL)01/96]

R

WARNING

Hold the brake pedal down while you move the gearshift
lever from position to position. If you do not hold the
brake pedal down, your vehicle may move unexpectedly
and injure someone.

File:09cdgfz.ex

Update:Fri May 24 08:25:56 1996

«
...
126
127
128
129
130
...
»

Summary of Contents for Mystique























































































































































































































































































Reviews:

No comments

Related manuals for Mystique

Retrotech RTX-68D-CHG

Brand: Dakota Digital Pages: 4

Brand: Kia Pages: 419

Brand: Axxess Pages: 8

Brand: Ironton Pages: 7

Porsche 911 GT3 R

Brand: iRacing Pages: 25

Brand: Rago FABRICATION Pages: 10

StreetLine Series

Brand: SAAS Pages: 4

Brand: PAC Pages: 14

Brand: Kolpin Pages: 3

Brand: Metra Electronics Pages: 8

Brand: VER-MAC Pages: 64

Brand: Jaeger Pages: 11

Brand: Paser Pages: 2

Brand: Xblitz Pages: 56

Brand: Kia Pages: 680

Brand: travall Pages: 4

1999 Crown Victoria

Brand: Ford Pages: 208

Brand: Phonocell Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands