FE1-23
EN
Copyright © 2015
P a g e
|
1
www.Ford-tools.com
1
APPLICATION .......................................................... 3
2
DESCRIPTION (FIG. A) ............................................ 3
3
PACKAGE CONTENT LIST ......................................... 3
4
SYMBOLS ................................................................. 4
5
GENERAL POWER TOOL SAFETY WARNINGS ............ 4
5.1
Work area safety.......................................................................... 4
5.2
Electrical safety ........................................................................... 4
5.3
Personal safety ............................................................................ 5
5.4
Power tool use and care ............................................................... 5
5.5
Service ......................................................................................... 6
6
SAFETY WARNINGS COMMON FOR GRINDING,
SANDING, WIRE BRUSHING, POLISHING OR
ABRASIVE CUTTING-OFF OPERATIONS ................... 6
7
ADDITIONAL SAFETY WARNINGS SPECIFIC FOR
ABRASIVE CUTTING-OFF OPERATIONS ................... 7
8
FURTHER SAFETY INSTRUCTIONS FOR ALL
OPERATIONS ........................................................... 8
8.1
Kickback and Related Warnings ................................................... 8
9
SAFETY WARNINGS SPECIFIC FOR GRINDING
OPERATIONS ........................................................... 8
10
SPECIAL SAFETY REGULATIONS .............................. 9
11
PREPARATION FOR USE ......................................... 10
11.1
Fitting the auxiliary handle (Fig 2) ............................................ 10
11.2
Assembly of the protective guard (Fig. 3 - 4) ............................. 10
11.3
Mounting/replacing a grinding disc (Fig.5-6) ........................... 10
12
FLANGE ARRANGEMENTS WHEN USING GRINDING
WHEELS AND CUTTING WHEELS ............................ 11
12.1
Flange arrangements when using a depressed centre or straight
grinding wheel ........................................................................... 11
12.2
Flange arrangement when using a depressed-centre cutting
wheel ......................................................................................... 11
