Ford 2013 Flex Page 487 Owner'S Manual Download

Page: 487 / 558

“USB” or “SD CARD”

“Play music video <name>”

“Shuffle off”

“Play playlist <name>”

“What’s this?”

“Play podcast <name>”

“Help”

If you have said you would like to browse your USB or SD card, the

system prompts you to specify what you would like to browse. When
prompted, refer to the following “Browse” chart.

These commands are only available in USB mode and are

device-dependent.

“BROWSE”

“Album <name>”

“All video podcasts”*

“All albums”

“All videos”*

“All artists”

“Artist <name>”

“All audiobooks”

“Audiobook <name>”

“All authors”

“Author <name>”

“All composers”

“Composer <name>”

“All folders”

“Folder <name>”

“All genres”

“Genre <name>”

“All movies”*

“Playlist <name>”

“All music videos”*

“Podcast <name>”

“All playlists”

“TV show <name>”*

“All podcasts”

“Video <name>”*

“All songs”

“Video playlist <name>”*

“All TV shows”*

“Video podcast <Name>”*

“All video playlists”*

“Help”

*These commands are only available in USB mode and are
device-dependent.

Bluetooth Audio

Your system allows you to stream audio over your vehicle’s speakers from

your connected, Bluetooth-enabled cellular phone.

To access, press the lower left corner on the touchscreen, then

select the BT tab.

MyFord Touch™

487

2013 Flex

(471)

Owners Guide gf, 1st Printing
USA

(fus)

Summary of Contents for 2013 Flex















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands

Ford 2013 Flex, Owner'S Manual

Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands