Ford 2013 Flex Page 455 Owner'S Manual Download

Page: 455 / 558

they will not be stepped on or interfere with the operation of pedals,

seats and/or compartments, or safe driving abilities.

•

Do not leave playing devices in the vehicle in extreme conditions as it

could cause damage to your device. Refer to your device’s user guide

for further information.

•

For your safety, some SYNC

威

functions are speed dependent and

cannot be performed when the vehicle is traveling at speeds greater

than 3 mph (5 km/h).

•

Ensure that you review your device’s user guide before using with

SYNC

威

Speed-Restricted Features

Some features of this system may be too difficult to use while the vehicle

is in motion so they’re restricted from being modified unless the vehicle

is not moving. Some examples of these are listed below:

•

Screens that are too crowded with information, such as Point of

Interest (POI) reviews and ratings, SIRIUS

威

Travel Link™ sports

scores, movie times, ski conditions, etc.

•

Any action that requires using a keyboard, such as entering a

navigation destination or editing information

•

All lists are limited so the user can view fewer entries (e.g. phone

contacts, recent phone call entries)

Listed below are more specific features that can only be modified while

the vehicle is not moving:

Restricted features

Cellular Phone

Pairing a Bluetooth phone

Adding phonebook contacts or uploading
phonebook contacts (from a USB)

Lists entries are limited for phone contacts
and recent phone call entries

MyFord Touch™

455

2013 Flex

(471)

Owners Guide gf, 1st Printing
USA

(fus)

Summary of Contents for 2013 Flex















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands

Ford 2013 Flex, Owner'S Manual

Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands