Ford 2013 Flex Page 495 Owner'S Manual Download

Page: 495 / 558

Pre-defined text message options

Call me later

Can you give me a call?

I just left, I’ll be there soon

I’ll call you back in a few minutes

I’ll call you when I get there

I’m ahead of schedule, so I’ll be there early

I’m on my way

I’m outside

I’m running a few minutes late

LOL

Stuck in traffic

Thanks

Yes

Receiving a Text Message

Note:

If you select View and your vehicle is traveling over 5 mph

(8 km/h), the system offers to read the message to you instead of

allowing you to view it while driving.

When a new message arrives, an audible tone sounds and the screen

displays a pop-up with the caller name and ID, if supported by your

phone. You can press:

•

View to view the text message.

•

Listen for SYNC to read the message to you.

•

Reply to send a reply text message.

•

Dial to call the contact.

•

Ignore to exit the screen.

MyFord Touch™

495

2013 Flex

(471)

Owners Guide gf, 1st Printing
USA

(fus)

Summary of Contents for 2013 Flex















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands

Ford 2013 Flex, Owner'S Manual

Search results

Summary of Contents for 2013 Flex

Reviews:

Related manuals for 2013 Flex

Brands by name

Popular brands