Ford 2011 F-250 Page 31 Owner'S Manual Download

Page: 31 / 449

TRAIN RIGHT REAR TIRE (if equipped)

— Displayed when training

the TPMS. Refer to

TPMS reset procedure

in the

Tires, Wheels and

Loading

chapter for more information.

TRAIN LEFT REAR TIRE (if equipped)

— Displayed when training

the TPMS. Refer to

TPMS reset procedure

in the

Tires, Wheels and

Loading

chapter for more information.

TIRES NOT TRAINED – REPEAT (if equipped)

— Displayed when

an error occurs while training the TPMS. Refer to

TPMS reset procedure

in the

Tires, Wheels and Loading

chapter for more information.

TRAINING COMPLETE (if equipped)

— Displayed when training of

the TPMS is complete. Refer to

TPMS reset procedure

in the

Tires,

Wheels and Loading

chapter for more information.

TRACTION CONTROL OFF (if equipped)

— Displayed when the

traction control has been disabled by the driver. Refer to the

Driving

chapter for more information.

INTKEY COULD NOT PROGRAM

— Displayed when an attempt is

made to program a fifth integrated key to the remote keyless entry
system. For more information on integrated key, refer to the

Locks and

Security

chapter.

KEY COULD NOT PROGRAM

— Displayed when an attempt is made

to program a spare key using two existing MyKeys. Refer to

MyKey

威

the

Locks and Security

chapter for more information.

VEHICLE SPEED 80 MPH MAX

— Displayed when a MyKey

威

is in

use and the Admin has enabled the MyKey speed limit and the vehicle
speed is 80 mph (130 km/h). Refer to

MyKey

威

in the

Locks and

Security

chapter for more information.

SPEED LIMITED TO 80 MPH

— Displayed when starting the vehicle

and MyKey

威

is in use and the MyKey speed limit is on. Refer to

MyKey

威

in the

Locks and Security

chapter for more information.

CHECK SPEED DRIVE SAFELY

— Displayed when a MyKey

威

is in

use and the optional setting is on and the vehicle exceeds a preselected
speed. Refer to

MyKey

威

in the

Locks and Security

chapter for more

information.

VEHICLE NEAR TOP SPEED

— Displayed when a MyKey

威

is in use

and the MyKey speed limit is on and the vehicle speed is approaching
80 mph (130 km/h). Refer to

MyKey

威

in the

Locks and Security

chapter for more information.

TOP SPEED MYKEY SETTING

— Displayed when a MyKey

威

is in use

and the MyKey speed limit is on and the vehicle speed is 80 mph
(130 km/h). Refer to

MyKey

威

in the

Locks and Security

chapter for

more information.

Instrument Cluster

2011 F-250/350/450/550

(f23)

Owners Guide, 4th Printing
USA

(fus)

Summary of Contents for 2011 F-250


































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 F-250

Reviews:

Related manuals for 2011 F-250

Brands by name

Popular brands

Ford 2011 F-250, Owner'S Manual

Search results

Summary of Contents for 2011 F-250

Reviews:

Related manuals for 2011 F-250

Brands by name

Popular brands