Ford 2011 F-250 Page 98 Owner'S Manual Download

Page: 98 / 449

TILT/TELESCOPE STEERING WHEEL

To adjust the steering wheel:

1. Pull the lever down to unlock the
steering column.

2. While the lever is in the down
position, move the steering wheel
up or down and in or out until you
find the desired position.

3. While holding the steering wheel
in place, pull the lever up to its
original position to lock the steering
column.

WARNING:

Never adjust the steering wheel when the vehicle is

moving.

ILLUMINATED VISOR MIRROR (IF EQUIPPED)

Lift the mirror cover to turn on the
visor mirror lamp.

OVERHEAD CONSOLE (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to
your option package.

Driver Controls

2011 F-250/350/450/550

(f23)

Owners Guide, 4th Printing
USA

(fus)

Summary of Contents for 2011 F-250


































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 F-250

Reviews:

Related manuals for 2011 F-250

Brands by name

Popular brands

Ford 2011 F-250, Owner'S Manual

Search results

Summary of Contents for 2011 F-250

Reviews:

Related manuals for 2011 F-250

Brands by name

Popular brands