Erasing HomeLink
姞
buttons
Console mount
Visor mount
To erase the three programmed buttons (individual buttons cannot be
erased):
•
Press and hold the two outer HomeLink
威
buttons until the indicator
light begins to flash-after 20 seconds. Release both buttons. Do not
hold for longer that 30 seconds.
HomeLink
威
is now in the train (or learning) mode and can be
programmed at any time beginning with Step 1 in the
Programming
section.
Reprogramming a single HomeLink
姞
button
To program a device to HomeLink
威
using a HomeLink
威
button previously
trained, follow these steps:
1. Press and hold the desired HomeLink
威
button.
Do NOT
release the
button.
2. The indicator light will begin to flash after 20 seconds. Without
releasing the HomeLink
威
button, follow Step 1 in the
Programming
section.
For questions or comments, contact HomeLink
威
at
www.homelink.com
or
1–800–355–3515.
Driver Controls
139
2010 Explorer
(exp)
Owners Guide, 2nd Printing
USA
(fus)
