Ford 2009 Taurus X Owner'S Manual Download Page 64

Page: 64 / 336

COMP (Compression):

Compression brings soft and loud CD passages

together for a more consistent listening level when in CD mode. Press to
turn the feature on/off.

SHUFFLE:

Press to hear all tracks on the current CD in random order.

Press again to stop.

SCAN:

Press for a brief sampling of all tracks on the current CD. Press

again to stop.

Playing MP3 discs

To play an MP3 disc on your DVD system:

1. Ensure that the vehicle is on or the ignition is in accessory mode.

2. Ensure that the DVD system is on.

3. Insert the MP3 disc into the DVD system, label side up.

4. The folder, track and elapsed
time will appear in the status bar.
The screen will list the Artist, Title,
Album and File Name.

COMP (Compression):

Compression brings soft and loud CD/MP3

passages together for a more consistent listening level when in CD mode.
Press to turn the feature on/off.

SHUFFLE:

Press to hear all tracks on the current MP3 folder in random

order. Press again to stop.

SCAN:

Press for a brief sampling of all tracks on the current MP3 folder.

Press again to stop.

FOLDER LIST:

Press access folder mode and to go to the previous/next

folder in the MP3 disc.

MP3 disc quality factors

Several factors can effect disc playback quality:

•

Disc capacity — Each disc contains about 650 MB of storage capacity.
We do not recommend using high capacity discs containing 700MB of
storage.

•

Disc type — Some CD-RW discs may operate inconsistently and may
cause an error message to appear. We recommend burning MP3 files
onto CD-R discs.

2009 Taurus

(500)

Owners Guide, 1st Printing
USA

(fus)

Entertainment Systems

Summary of Contents for 2009 Taurus X

















































































































































































































































































































































Search results

Summary of Contents for 2009 Taurus X

Reviews:

Related manuals for 2009 Taurus X

Brands by name

Popular brands

Ford 2009 Taurus X, Owner'S Manual

Search results

Summary of Contents for 2009 Taurus X

Reviews:

Related manuals for 2009 Taurus X

Brands by name

Popular brands