Ford 2000 Contour Page 224 Manual Download

Page: 224 / 248

Capacities and specifications

224

* Total capacity

** with automatic transaxle

Engine oil
- with filter
- without

Manual transaxle

1.9 l (2.0 qts)

Automatic transaxle
with oil cooler

Power steering

Cooling system with heating

Windshield washer fluid

Fuel tank

Braking system

4.25 l (4.5 qts)
3.75 l (4.0 qts)

8.5 l (9.0 qts.)

6.6 l (7.0 qts)*

7.1 l (7.5 qts)**

Fill to MAX mark

Fill to top of reservoir

58.5 l (15.4 gallons)

Fill to MAX mark

5.5 l (5.8 qts)
5.0 l (5.3 qts)

9.6 l (10.2 qts)

9.5 l (10.0 qts)*

9.7 l (10.2 qts)**

Capacities

2.0 litre

engine

2.5 litre

engine

32CCSen 17.6.99 11:31 Uhr Seite 224

Summary of Contents for 2000 Contour

























































































































































































































































Search results

Summary of Contents for 2000 Contour

Reviews:

Related manuals for 2000 Contour

Brands by name

Popular brands

Ford 2000 Contour, Manual

Search results

Summary of Contents for 2000 Contour

Reviews:

Related manuals for 2000 Contour

Brands by name

Popular brands