Ford 2000 Contour Page 153 Manual Download

Page: 153 / 248

Roadside emergencies

153

Replacing a tire

1. Push the spare tire onto the
wheel studs.

2. Screw on the wheel nuts,
ensuring the tapered end of the
wheel nuts are facing the wheel,
and secure in a clockwise direction.

3. Lower the vehicle and remove
the jack by turning the handle
counterclockwise.

4. Fully tighten the wheel nuts in a
crosswise pattern.

5. Align the hub cap with the valve
and push firmly into position with
the ball of the hand.

6. Stow the jack and damaged tire
in the luggage compartment by
reversing the spare tire removal
instructions.

23CREen 17.6.99 11:11 Uhr Seite 153

Summary of Contents for 2000 Contour

























































































































































































































































Search results

Summary of Contents for 2000 Contour

Reviews:

Related manuals for 2000 Contour

Brands by name

Popular brands

Ford 2000 Contour, Manual

Search results

Summary of Contents for 2000 Contour

Reviews:

Related manuals for 2000 Contour

Brands by name

Popular brands