Ford 1996 Contour, Manual

Page: 119 / 286

Electronic Sound Systems
119
*
[AS04350(ALL)02/95]
Activate Auto Memory Store by pushing the “AUTO
PRESET” button once. Your radio will set the first five
strong stations of the band you are in (AM, FM1 or FM2)
into the memory buttons. The display will show “AUTO”,
then run through the frequencies, stopping momentarily on
the stations being set into the memory buttons. The radio is
now in the “AUTO” mode and this display will show
“AUTO” each time a preset is activated.
*
[AS04450(ALL)05/95]
NOTE: If there are fewer than five strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
*
[AS04550(ALL)05/95]
After all stations have been filled, the radio will begin
playing the station stored on memory button 1.
*
[AS04560(ALL)04/95]
To deactivate the Auto Memory Store mode and return to
the manually-set memory button stations (or those stations
set using Auto Memory Load), simply push the “AUTO
PRESET” button. Display will show “AUTO” then “OFF”.
The next time Auto Memory Store is activated on that band,
the radio will store the next set of five strong stations.
*
[AS04600(ALL)02/95]
Adjusting the tone balance and speaker output of your
radio
*
[AS04700(ALL)04/95]
■
Increasing or decreasing bass response
[AS04750(ALL)07/94]
Push the “AUDIO” button repeatedly until the display reads
“BASS”. Push the top (+) of the “VOLUME” button to
increase bass (more “lows”), and push the button (
s
) to
decrease bass (less “lows”).
*
[AS04800(ALL)04/95]
■
Increasing or decreasing treble response
[AS04900(ALL)07/94]
Push the “AUDIO” button repeatedly until the display reads
“TREB”. Push the top (+) of the “VOLUME” button to
increase treble (more “highs”), and push the bottom (
s
) to
decrease treble (less “highs”).
File:cdaso.ex
Update:Thu Jan 25 12:21:48 1996