Ford 1996 Contour, Manual

Page: 14 / 286

Safety Restraints
11
% [SR05625(ALL)03/95]
Dual Locking Mode Lap/Shoulder Belt Retractor
[SR05650(ALL)12/94]
The front passenger seat and the rear outer seat combination lap
and shoulder belts are equipped with a dual locking mode
retractor on the shoulder belt portion of the lap/shoulder belt.
This retractor can be switched from vehicle sensitive
(emergency) locking mode to automatic locking mode by pulling
the belt webbing all of the way out of the retractor. The
retractor modes function as follows.
*
[SR05675(ALL)02/95]
Vehicle sensitive (emergency) locking mode
[SR05700(ALL)05/94]
In this operating mode, the lap/shoulder belt retractor will
allow the occupant freedom of movement, locking tight only on
hard braking, hard cornering or impacts of approximately
5 mph (8 km/h) or more.
*
[SR05725(ALL)01/95]
Automatic locking mode
*
[SR05800(ALL)03/95]
This mode must be used when installing a child seat on the
front passenger seat and rear seats where dual locking retractors
are provided. To switch the retractor from the emergency
locking mode to the automatic locking mode, perform the
following steps:
*
[SR05850(ALL)03/95]
R
WARNING
Rear facing infant seats should never be placed in the
front seat.
*
[SR05900(ALL)03/95]
1.
Buckle the lap/shoulder combination belt.
*
[SR05950(ALL)01/95] 2.
Grasp the shoulder portion of the belt and pull downward
until all of the belt is extracted and a click is heard. At this
time, the retractor is in the automatic locking mode (child
restraint mode).
[SR06000(ALL)03/95] 3.
Allow the belt to retract. A clicking sound will be heard as
the belt retracts. This indicates that the retractor is in the
automatic locking mode.
File:cdsro.ex
Update:Thu Jan 25 12:13:11 1996