background image

● Electric animal fences intended for deterring birds, household pet containment or
   training animals such as cows need only be supplied from low output energisers
   to obtain satisfactory and safe performance.
●  In electric animal fences intended for deterring birds from roosting on buildings,
    no electric fence wire shall be connected to the energiser earth electrode.
    A warning sign shall be fitted to every point where persons may gain ready
    access to the conductors.
●  Where an electric animal fence crosses a public pathway, a non-electrified gate
    shall be incorporated in the electric animal fence at that point or a crossing by
    means of stiles shall be provided.  At any such crossing, the adjacent electrified
    wires shall carry warning signs.
● DO NOT operate electric fence energisers near any combustible materials
   including gasoline, cleaning fluids or kerosene. 
● Follow all national, state and local codes and regulations that apply to installation
   of an electric fence in your area. 
● Electric fences are very effective psychological barriers when properly installed
   and when animals are trained to the fence.  Electric fences are NOT complete
   physical barriers.  Erratic animal behavior cannot be predicted and occasional
   fence penetration can occur.  Therefore, the manufacturer assumes no liability for
  animal containment, injury or the consequences for the misuse of the equipment.

Note:
       The fence live (hot) terminal is indicated by a re

knob and a lightning bolt

       symbol (    ).  The ground is indicated by a black knob and an arrow symbol (    ). 

READ BEFORE YOU INSTALL YOUR ELECTRIC FENCE ENERGISER    Page 4

PRODUCT SPECIFICATIONS & FEATURES

 100-240V AC input with AC-DC power adapter.

 External 12V rechargeable battery input - BATTERY NOT INCLUDED.

 Full-Power and Half-Power modes – User selectable.   

 Fence Voltage Indicators – LED indicators let you know the fence voltage, and if

   your fence has too much leakage.

 Battery Voltage Indicators – LED indicators notify when to swap you current

   battery with a fully charged battery.

 1J, 3J or 5J output energy dependent on the model chosen

   (not stored energy, but output to fence).

 Secure mounting with 3 mounting holes on the top of the unit and 2 at bottom.

 IP44 ingress protection.

 ABS casing with UV stabilisation.

Summary of Contents for DUALGIZER DG1

















Reviews: