18
7.) Apply a drop of control solution to
the absorbent hole of the test strip
until the confirmation window is
fully covered with blood.
8.) Wait for the meter to finish analyz
-
ing the sample and display the test
result.
9.) Make sure the test result falls
within the acceptable range.
Note
The meter will produce a beep sound and then begin to count
down. The results will display on the screen and automatically
saved in the meter.
Note
Control test results can appear as numeric or PASS/FAIL,
which depends on how the meter is set.
Apply sample to strip
Y1
Y1
Pass
Y1
