14
2008/06/20
BackLight Ctrl
Setting Date
Training
12:59 AM
4/4
Training Test Procedure
Please follow the steps below to access Training Mode.
Each operator has to pass a training test through Training Mode
before performing measurements for patients (Measure Mode).
This
ForaCare
POCT S10 system will evaluate the examinee’s
training by simple testing and only successful trainees will be-
come proficient operator to access Measure Mode.
Training
1.) Press the On/Off button to turn on
the meter, and select setup mode.
2.)
Press Up/Down button to select
Training Mode, then press S button.
3.) Scan or manually enter the exam
-
inee’s ID via the keypad.
4.) Perform Control Test.
Please refer to the Control Test Procedure section to perform
control tests.
5.) Perform Patient Test.
Please refer to the Patient Test Procedure section to perform
patient tests.
2008/06/20
Memory Mode
Measure Mode
Setup Mode
12:59 AM
4/4
Enter examinee ID
examinee ID:
:Back
:Enter
5/5
