Slide forward battery
cover.
Place the batteries, remember
about the correct po -.
Slide battery cover back.
Insert the lancet into the lancet
holder.
Set the puncture depth by
turning the end of the cap.
1. GLUCOSE METER DESCRIPTION
2. STARTING THE DEVICE
Pull back the movable part
until you hear a click.
3. SETTING THE DATE AND TIME
Twist and remove the lancet
cap.
2
6
5
4
3
2
1
4. PREPARING THE LANCING DEVICE
Twist and remove the cap
from the lancing device.
Put and tighten the cap back
onto the lancing device.
1
B
A
When the unit is turned off hold for 4 sec.
Press or , to select the time format. Press
, to confirm the settings.
Use and buttons to set the date and
month. Press to confirm the settings.
1
Display
Button
Backlight
Test Strip Port
Button
Test Strip
Ejector
Button
1
2
3
3
5
A
B
6
4
Use and , buttons to set the year.
Press , to confirm the settings.
Use and to set the hour and minutes.
Press to confirm the settings.
Button
Data Port
Battery Cover
Label
Test Strip
Ejector
Button
2
3
4
QUICK REFERENCE GUIDE
This quick instruction for use will help you to set up and prepare your glucose meter for
performing a test. For detailed information, see the Instructions for use included to the set
ABRA SMART BT.
BLOOD GLUCOSE MONITORING SYSTEM
