EN-7
NOTE
If a probe cover is not attached on the probe, LCD will show “
” until a new probe cover is firmly attached to the probe.
The used probe cover should be removed after each
measurement by a clean and new probe cover to ensure
accuracy reading.
For hygiene use, attach a new probe cover each time and do
not touch its tip.
Hints on Taking Ear Temperture
As with other of thermometer, you may observe
slight variations in consecutive measurements.
It is
recommended that you take 3 temperature readings
and use the highest one for the following situations:
Infants younger than 3 months old.
Children younger than 3 years old and who have a
compromised immune system and the presence /
absence of fever is critical.
When you are learning to use the thermometer.
Do not take a reading while eating and /or talking.
Wait 30 minutes after any of the following situations
before taking a measurement:
When you have your ear covered.
After exercising, swimming, or taking a bath. When
expose to extreme temperature.
To take accurate readings, the ear must be free from
excess earwax build-up.
Replacing Probe Cover (IR20)
Step 1
Check the probe cover is clean and
new.
Step 2
Attach new probe cover into the
probe.
Now, you can start to test your
ear temperature.
