Fora DUO ultima D40, Owner'S Manual

Page: 12 / 176

D40 Owner’s Manual
EN-10
Measuring Blood Pressure
This device provides you two different ways to measure your blood pressure.
When the device detects an irregular heart beat, the pulse rate symbol is shown as “
” instead of “ ”. If the problem still persists, please consult your doctor.
Important!
Always apply the pressure cuff before turning on the device.
A. Single Measurement
Perform an individual blood pressure measurement.
1. Press
. All the LCD symbols will appear.
2. Press to select the desired user number and then press . Then the cuff will
begin to inflate automatically.
A pulse is detected. Displays the systolic pressure, diastolic
pressure, and pulse rate.
3. Press to turn the device off.
Note:
• If the device is idle for 3 minutes, it will turn off automatically.
B. Average measurement
Automatically perform three (3) consecutive blood pressure measurements and
display the final average result.
1. Enter the Average mode.
Press and hold for 3 seconds (for D40b/D40g model), or just press (for D40a
model).
2. Press to select the desired user number and then press . Then the cuff will
begin to inflate automatically.
After the first measurement is complete, the
device will start counting down before the second
measurement begins. The device will take three (3)
measurements consecutively with an interval of 20
seconds.
After taken three measurements, the results are averaged to produce
the blood pressure measurement.
3. Press to turn the device off.