Fora COMFORT pro GD40, Owner'S Manual

Page: 10 / 44

10
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not
fully inserted into the test slot.
NOTE:
The FORA COMFORT pro GD40 monitor should only be used with FORA
COMFORT pro GD40 Test Strips. Using other test strips with this meter can
produce inaccurate results.
Test Strip
1
3
4
2
Absorbent Hole
Apply a drop of blood here.
The blood will be automatically absorbed.
Confirmation Window
This is where you confirm if enough blood has
been
applied to the absorbent hole in the strip.
Test Strip Handle
Hold this part to insert the test strip into the
slot.
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
Front